Initial assessment
The installer evaluates the radon results, foundation type, available pathways, feasible piping and exhaust locations, and other building-specific conditions.
Common systems
Active soil depressurization is widely used: a fan draws soil gas from below the foundation and vents it outdoors through sealed piping. Other approaches may be needed for some foundations.
Installation and indicators
Piping, fan placement, electrical connection and other components should be installed according to applicable standards. A pressure indicator can show system operation but does not measure indoor radon concentration.
Post-installation test
A radon test after installation is important to verify the indoor level. Owners should keep the report and maintain and retest the system as recommended.
Trusted references
For complete official guidance, read EPA radon information, the CDC radon testing guide, and for Virginia projects the Virginia Department of Health radon professionals page.
This article is general education. It cannot diagnose a particular property or replace a test conducted under the appropriate protocol.